Olympus-Zone





Linux

Setup :

Tested with the kernel 2.2.17 & 2.4.5, it's working. Do not use not the 2.4.4, it is _ really _ buggy. Therefore, download linux-2.4.5.tar.gz dans /usr/src/. After, decompress it #> tar -xzf linux-2.4.5.tar.gz. in conf (make menuconfig), choice
Code maturity level options -->
 [*] Prompt for developpement and/or incomplete code drivers
Network Options -->
[*] Kernel/User netlink socket
 <*> Netlink device emulation
[*] TCP/IP Networking
 [*] IP: Multicasting
 <*> IP: Tunneling
 <*> IP: GRE tunnels over IP
 [*] The IPv6 Protocol [& suboptions like EUI-64]
build it (make dep; make bzImage), install in lilo & Reboot :)

script :

you need the package Net-tools with the support ipv6.The sources can be obtained on this Adress
Net-tools

If you have the Net-tools IPv6:

	ifconfig t0 up
	ifconfig t0 inet6 tunnel ::[ipv4_du_tunnel_broker]
	ifconfig t1 up
	ifconfig t1 inet6 add [votre_ipv6_publique]/127
	route -A inet6 add ::/0 dev t1
	
If you have the package route2 :
	modprobe ipv6
	ip tunnel add xbone mode sit remote [ipv4_du_tunnel_broker] local [votre_ipv4_publique] ttl 255
	ip link set xbone up
	ip addr add [votre_ipv6_publique]/127 dev xbone
	ip route add ::/0 dev xbone
	ip -f inet6 addr
	

script LAN :

ifconfig eth0 add [IPv6 LAN]/[PREFIXLEN] it is important to have the same PREFIXLEN on all the machines of the LAN.

Router

To make to your machine a IPv6 router :

1) to use the standard configuration
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding

Author
Jean Théry

This Page in your language (This page in other languages) :
EnglishFrench (Français)

6Bone Webring
[ Previous 5 Sites | Previous | Next | Next 5 Sites | Random Site | List Sites | Join ]
IPv6 Webring
[ Previous 5 Sites | Previous | Next | Next 5 Sites | Random Site | List Sites | Join ]

Friday 13 December 2024
Load time : 0.232 seconds
Connected via IPv4 (IPv4 Only here IPv6 Only here www)
©2001-2024 Olympus-Zone    Webmaster Jean Théry Valid HTML 4.01! Valid CSS!